| gemellocattivo.com http://gemellocattivo.com/forum/ |
|
| 355/512M Rod bolts http://gemellocattivo.com/forum/viewtopic.php?f=2&t=27 |
Page 1 of 2 |
| Author: | MerlinTech [ Thu Jan 15, 2015 11:27 am ] | ||
| Post subject: | 355/512M Rod bolts | ||
I need 24 rod bolts for a 355/512M. Ferrari only has a few and SPS no longer makes them. ARP has taken months to get my last stud order done  and I can't get anyone there to even talk to me or call me back. I am not opposed to finding someone to make them, I just don't have anyone at the moment.
|
|||
| Author: | mk e [ Thu Jan 15, 2015 1:16 pm ] |
| Post subject: | Re: 355/512M Rod bolts |
Well that sucks! ARP seems to be the go-to place generally. I've heard a1 technologies https://www.facebook.com/pages/A1-Techn ... fref=photo or maybe PM john (cribbj) on flife.....he was on about a custom stud maker so he may have someone? |
|
| Author: | mk e [ Thu Jan 15, 2015 1:21 pm ] |
| Post subject: | Re: 355/512M Rod bolts |
or maybe someplace like this: http://www.msaerospace.com/ they do custom: http://www.msaerospace.com/viewcart.php |
|
| Author: | MerlinTech [ Thu Jan 15, 2015 3:11 pm ] |
| Post subject: | Re: 355/512M Rod bolts |
Thanks Mark, I PMed cribbj. ARP said they were really swamped because another company closed. I am guessing it is A1 Technologies. Facebook has no new post for some time, web page and phone are a no go. 
|
|
| Author: | duck.co.za [ Thu Feb 05, 2015 1:32 am ] |
| Post subject: | Re: 355/512M Rod bolts |
I got mine directly from Pankl . I will try and find the details ,they were very helpful . |
|
| Author: | MerlinTech [ Thu Feb 05, 2015 7:49 am ] |
| Post subject: | Re: 355/512M Rod bolts |
duck.co.za wrote: I got mine directly from Pankl . I will try and find the details ,they were very helpful . Thanks, I have found the contact and am getting them direct too. |
|
| Author: | duck.co.za [ Thu Feb 05, 2015 4:10 pm ] |
| Post subject: | Re: 355/512M Rod bolts |
Make sure you request their assembly lube , the Ti rods are known for galling !! I used a set in my 308 motor and saved almost 1,5kg 
|
|
| Author: | MerlinTech [ Fri Feb 06, 2015 7:15 am ] |
| Post subject: | Re: 355/512M Rod bolts |
duck.co.za wrote: Make sure you request their assembly lube , the Ti rods are known for galling !! I used a set in my 308 motor and saved almost 1,5kg Yes, I have the Molykote 1000 paste. On the Boxer engine project, with the 512M crank and Ti rods we saved about 8 kg. 
|
|
| Author: | duck.co.za [ Fri Feb 06, 2015 7:34 am ] |
| Post subject: | Re: 355/512M Rod bolts |
Wow that's impressive , where are the pics ? I love to see that stuff . |
|
| Author: | MerlinTech [ Fri Feb 06, 2015 10:16 am ] | ||
| Post subject: | Re: 355/512M Rod bolts | ||
duck.co.za wrote: Wow that's impressive , where are the pics ? I love to see that stuff . Look under Stuff I work on thread, pictures there. Oh what the hell, he is one. It is hard to see, but the crank is really cut down and lite weight. Gun drilled mains, angle drilled rod throws, under cut counter weights, and thinner counter weights.
|
|||
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|